3m Wide Architectural Window Film for Commercial Glass Facades
Product Details
3m Wide Architectural Film
,Commercial Architectural Film
,3m Wide Architectural Window Film
3m Wide Architectural Window Film for Commercial Glass Facades
AIGA Living architectural window film is developed for facade contractors, window film installers, building-material distributors, and commercial project buyers. The PET-based range is suitable for curtain walls, office buildings, hotels, shopping malls, airports, villas, and other large architectural glazing applications.
The portfolio includes solar control window film, building glass heat insulation film, reflective window film, privacy glass film, and decorative architectural film. Buyers can select the required light-transmission level according to facade orientation, glass construction, daylight, glare, and privacy requirements instead of relying only on colour or one heat-rejection value.
Selected models are available in widths of up to 3000 mm. For oversized facade glass in the Middle East, a 3m wide architectural window film provides greater cutting flexibility. Where pane dimensions and installation direction permit, the wide format can reduce seams and support a more continuous colour and reflective appearance across the glass facade.
Middle East projects commonly focus on solar heat gain, glare, daytime privacy, and indoor comfort under intense sunlight. In Europe, commercial window film is frequently considered for existing offices, hotels, schools, and retail properties where the original glass is to remain in place while its solar, optical, or privacy performance is adjusted.
Before a model is specified, the glazing must be identified as annealed, tempered, laminated, insulated, or Low-E glass. Installation position, film absorption, and glass construction influence the completed system, so commercial projects should be reviewed against the actual glazing configuration.
Reference Specifications for Selected 3m Wide Models
| Technical Item | Available Performance Range |
|---|---|
| Maximum Width | 3000 mm |
| Standard Roll Length | 50 m / 100 m |
| Main Material Thickness | 2 mil, approximately 50.8 μm |
| Visible Light Transmission | 20%–72% |
| UV Rejection | 99.5% |
| IR Rejection | 80%–95% |
| Total Solar Energy Rejection | 57.7%–73.9% |
| Total Solar Energy Transmission | 26.1%–42.3% |
These ranges represent different 3m wide solar control film models. They do not indicate that one film provides every highest or lowest value in the table. Final specifications depend on the selected colour, visible-light level, and film construction.
Selection Options
High-Transmission Architectural Film
Suitable for hotels, offices, and commercial spaces where daylight and exterior views are important. A representative high-transmission model offers up to 72% VLT while providing solar and ultraviolet control.
Medium-Transmission Solar Control Film
Suitable for facade projects requiring a balance between daylight, glare management, and solar control. A representative model provides 50% VLT, 95% IR rejection, and 73.9% TSER.
Lower-Transmission Privacy and Shading Film
Suitable for highly exposed elevations, glare-sensitive areas, and commercial spaces requiring stronger daytime privacy. Interior brightness, nighttime visibility, and facade appearance should also be assessed.
FAQ:
Q1:How is architectural window film different from automotive film?
A1:Architectural film must be selected according to building-glass construction, solar absorption, pane dimensions, and installation position. Automotive glazing has different dimensions and operating conditions, so automotive film should not be applied to building facades without a compatibility assessment.
Q2:Can 3m wide window film eliminate seams?
A2:A 3000 mm wide film can reduce or avoid seams when the usable film width covers the pane and the installation direction and working space are suitable. Cutting allowance, transportation, handling, and site access must also be considered.
Q3:Which heat-control value is suitable for Middle East buildings?
A3:IR rejection should not be evaluated alone. Middle East projects should compare TSER, VLT, facade orientation, glazed area, and daylight requirements. A hotel lobby, office tower, and shopping mall may each require a different light-transmission level.
Q4:Can architectural glass film be applied to Low-E glass?
A4:Compatibility depends on the Low-E coating position, insulated-glass construction, pane thickness, and the solar absorption of the selected film. The full glazing configuration should be reviewed before specification to manage thermal-stress risk.
Q5: Can European buildings retrofit their existing glass with window film?
A5:Where the existing glass is in good condition and compatible with the film, architectural window film can be used as a glazing retrofit. Damaged panes, failed insulated-glass seals, or glazing that does not meet safety requirements should be addressed before installation.
Q6:What information is required for a project quotation?
A6:Please provide the pane width and height, glass type and thickness, facade orientation, installation surface, required VLT, primary function, project quantity, and destination. If the specification is not yet defined, describe the heat, glare, privacy, or seam issue that needs to be addressed.
